Tuesday, May 28, 2013
Podiums with his own hands the WHA in 2114
The idea of ??every car enthusiast who likes to spend time upgrading my car, wants to wants to give your car unique. Tuning is generally considered a matter of troublesome, but when the result exceeds all expectations, then spent it already does not care. For those who have not yet faced with the installation of sound system in the car, it is necessary to clarify that midbasa at the front podium - is the main part of the entire audio system. In this case we are interested in installing a podium in a car VAZ 2114. The challenge for playing high-quality sound, you need to install the speakers at the correct angle. To this end, the entire area of ??the wooden podium will be deposited makrofleks, and then he pasted frame with glass. Materials for making the podium will need the following materials: plywood, 8 mm thick with an area of ??0.8 sq. m. thick cardboard hardboard fiberglass thickness of 0,25 mm and an area of ??2 square meters, uglelenta epoxy putty EHP polyester with glass emery cloth with a rubber holder cutter plasticine PVA glue spray makrofleksa screws nails rubber gloves Safety work should be performed in thick rubber gloves. Work to determine the size of a podium carved layout of the paper. Then, focusing on the layout of plywood with the cutter sawed the bottom of the podium, the range for the most dynamic and lateral struts on which it will be fixed. In order for the final assembly of the podium was easier to customize the details of the size, preferably all components of the cut immediately in duplicate. Then, using PVA glue and nails, he is going to the podium. The inner diameter of the ring to do with the stock and let it be outside butt. Pocket can be drunk from plywood, and you can use already available. It should be just unscrew from the hull and podpilit that it accurately adjoined to the bottom of the podium. The whole construction fill makrofleksom. Layer should be thin, otherwise it will be a long time to dry. After drying process the outer layer: First, cut away all the excess and then oshkurivaem and the podium is almost ready. Now combine the frame at the base of the whole area. To do this, cut out of hardboard one additional item, the so-called rear panel. If this item is missing, try to increase the thickness by means of thick cardboard. Attach the resulting "flat" to the plywood with glue PVA .. Then, using putty and a putty knife to give details of the status of a whole. Again, wait until dry and again oshkurivaem medium grit sandpaper. Before installing ready-made podiums can be painted or vinyl obtyanut and the work is completed. Despite the result that the finished equipment VAZ 2114 does not imply the existence of a powerful speaker system, with adequate tools and imagination, a Russian man will not give in to the seeming at first glance, a daunting task. The owners of domestic cars will always find a way out and from the car will be heard loud music.
